Topic Archives: Projects
Dec 24, 2018, 8:27 AM
In this episode, Leo and friends continue replacing frames, starting now on the intermediate frames in-between the station frames. Washington is hit by severe wind and power cuts – will the boat-shed survive?! Brad is still helping out, and we are joined by a young guy from Illinois who is keen to help out and learn a little about boatbuilding. In other news, we get a Christmas Tree in the loft, and make some improvements to our bunk-room.
Dec 9, 2018, 1:12 PM
Well, I’ve done something very silly and cut the end of my finger. Why would I do that, you may ask?! Well, it was all going a little too well, so I thought it was time to add a little drama to this project! In other news, making and installing the new frames has been progressing pretty well, and we have now replaced every station-frame in the centre section of the boat! We also finished the “roller-furling” roof on the new covered area beside the boat. Eventually, Ben and Steve had to leave, but I’m now getting some more help from Brad, who drove up from Oregon. Feel free to guess how I injured my finger, but it wasn’t on the table-saw or the ship-saw! (and yes, I am fully capitalizing on this injury to try and get more YouTube views)
Nov 27, 2018, 6:03 PM
Leo thought it was about time you guys got to know him a little better. This video – edited and presented by Doug at SV Seeker – is a series of questions and answers about Leo's background, his work, and the Tally Ho project. Leo talks about his motivation for taking on a project like this, and the various challenges that present themselves along the way. Please note that this was filmed a few months ago, so there are a couple of details that are out of date. Thanks to Doug for making this happen.
Nov 11, 2018, 11:25 PM
In this episode Leo welcomes back Francesca to the workshop and introduce a couple of volunteers who are going to stay here for a while to learn some boatbuilding and help out with the project. But before they arrive, he has to replace the huge roof of the shed over the boat, and make some improvements to the workshop kitchen, with a bit of furniture joinery. Then he shows the guys how to fit a pair of new frames, and we also cut out all the pieces for the next set on the shipsaw. Now we have four pairs of new double-sawn frames in the boat, and another pair ready to assemble.
Oct 29, 2018, 3:41 PM
In this episode Leo returns to Washington State USA, and gets back to work on Tally Ho! First he gives a brief tour of the project, and a little overview of the work done up until now. He gets the ship-saw set up again, and then get on with cutting a few more futtocks and assembling another couple of frames. He also talks about his plans and ideas for the future of the project, and how he's going to try and speed things up!
Oct 24, 2018, 1:07 PM
In this episode Leo visits two incredible projects that are both happening in Cornwall UK. They are both giving new life to traditional wooden fishing boats, but they are doing so in very different ways! Charlotte and Jess have rebuilt and converted their wooden fishing boat into a motor launch with a banquet table, and have started a business taking people out around the Cornish coastline for hand-cooked meals on board. Steve is maintaining and repairing his 110 year-old Danish Fishing Trawler, which has begun to work once more – but this time she is fishing for garbage! Steve has been clearing up rubbish and trash from the Cornish coastline for years, but now plans to use the huge fishing schooner to scale up the operation and clean less accessible areas, raising awareness of the issues of marine plastic waste at the same time.
Oct 8, 2018, 9:13 PM
Leo is away from Tally Ho at the moment, visiting friends and family. As usual in these times, he's chatting with boatbuilders for interest, information and learning. In this episode Leo visits Chris Rees, a very experienced boatbuilder who was behind various impressive projects including the enormous 3-masted lugger Greyhound and the replica fishing lugger Spirit of Mystery (which was sailed from the UK to Australia by Pete Goss as a tribute to the fishermen who undertook the same trip in the 1850s) Chris shows Leo around the boat that he is currently working on – a 1905 Pilot Cutter named Letty – and also tells Leo a little about how he became a boatbuilder. Finally they look at another boat that Chris is hoping to bring back to life – a historic local ferry, which up until recently was apparently the longest continuously running ferry in the country. Originally a Steam powered vessel, it was later modified with a diesel engine, but Chris is hoping to equip it with an Electric motor for the next period of service.
Oct 1, 2018, 9:41 AM
(Not Tally Ho ... Included for continuity) In this episode Leo visits the massively impressive new Pilot Cutter being built in Cornwall, UK. She is named the Pellew, and is a replica of the 68′ Falmouth Pilot Cutter Vincent, which was built in St Mawes in 1852. Leo has a conversation with Luke Powell, Project Manager and Chief Shipwright, about their progress since last time he last visited the project 6 months ago. They discuss the enormous mast that is currently being made, and also the challenges of managing a project of this size and scope.
Sep 21, 2018, 9:21 AM
In this episode we make a few more frames, and I talk about the jigs and products that I use to bed the frame-heels into the keel pockets. Lei gets some help from fellow youtuber Wood by Wright, and Kurt works on servicing the blade guides and making some other modifications on the huge ship-saw. Finally, we have to pack up shop and leave the country!
Sep 4, 2018, 8:34 PM
In this episode we develop some jigs and tables that will help the framing process go faster. The surface planing jig uses a large power plane to make one face of a piece of timber completely straight. A large assembly table lets us put frames together far more easily and accurately. Pancho observes, and tries to resist destroying the new frames! This episode is early because Leo won’t be able to post next weekend.